Metal Remover directions

Directions for use:

 

(Based on a 50 000l pool)

Use only as directed.

 

  1. Disconnect the automatic pool cleaner (APC).
  2. With the multiport set to CIRCULATE/RE-CIRCULATE/ BYPASS, pour 1 liter of HTH® Metal remover around the sides of the pool.
  3. Allow to circulate for at least 8 hours to ensure thorough mixing.
  4. Test and adjust pH if necessary.
  5. Reconnect the automatic pool cleaner.
  6. Allow the filter to run continuously for 24 hours.
  7. Resume normal chlorination and filtration.
  8. If your pool water turns cloudy after using HTH® Metal remover, add HTH® Sparkle It cube or HTH® Sparkle It in accordance with label instructions.