Fix common problems with pool cleaners
Test your pool water the fast way
Follow pack directions, dilute in bucket of water and pour around sides of the pool with the pump running.
Don’t add more than 2 cups at a time, dilute in bucket of water and pour around sides of the pool with the pump running.
Wait 4 hours before repeating.
Follow pack directions.
With pump off, add to one spot in the deep end.
You can switch pump on after 20 minutes.
Re-test after 12 hours.
Follow pack directions.
With pump off, add to one spot in the deep end.
You can switch pump on after 20 minutes.
Re-test after 12 hours.
Then correct TA.
Remember to adjust your pH before shock treating.
Follow pack directions.
We recommend that you add stabiliser if you have a large pool and you want to reduce the amount of chlorine that you need to add (reduce cost).
Products like floaters add stabiliser to our pool over a period of time.
We do not recommend stabiliser levels above 50ppm.
You will need to drain a quantity of pool water from your pool.
Remember to correct pH, backwash filter and clear baskets first.
Remember to rinse for 20 seconds before filtering.
Add chlorine in the early evening.
Consider using slow release chlorine floater.
It’s quick dissolve, fast acting and can be used on its own or in addition to other pool products.
If not, let the chlorine dissipate over the next day or two or drain a portion of water and top up with fresh water.