Use HTH® Clear Blu during periods of high winds, dust storms and thunderstorms or when the pool water appears cloudy. HTH® Clear Blu works by binding and trapping microscopic particles and algae spores, which are then removed through backwashing.

Directions for use:

• Ensure chlorine and pH levels are correct
  
• For best results, backwash and rinse your filter and clear pump and weir baskets
  
• Remove gel block from packaging Place HTH® Clear Blu into the weir basket – underneath the pressure plate
  
• Run the filter on the normal filter cycle
  
• If the automatic pool cleaner becomes sluggish, backwash immediately

HTH® Sparkle It Cube

When you want to clear cloudy water overnight or add extra sparkle to your water and reduce chlorine consumption, use the HTH® Sparkle It Cube

Directions for use:

• For best results, backwash and rinse your filter and clear pump and weir baskets
• Remove gel block from packaging
• Place HTH® Sparkle It Cube into the weir basket – underneath the pressure plate
• Run the filter for 12 hours overnightIf the automatic pool cleaner becomes sluggish, backwash immediately

HTH® Sparkle It

 
When water is cloudy and lacks sparkle or during periods of high winds, dust storms or thunderstorms, use HTH® Sparkle It. HTH® Sparkle It clears suspended materials, cloudy water and aids filtration and adds sparkle to the pool water.

Directions for use:

• Remove the automatic pool cleaner
  
• Mix the contents of the HTH® Sparkle It with 10 litres of water in a bucket
  
• With the pump on circulate/re-circulate/bypass pour the mixture around the sides of the pool
  
• Allow to circulate for 8 hours
  
• After 8 hours, switch the pump off for 12 hours
  
• If there are small amounts of sediment on the floor of the pool, the automatic pool cleaner can be reconnected
  
• If there are large amounts of sediment , it is recommended that the pool is manually vacuumed with the pump set on the waste position
  
• Place the pump on the backwash position and switch on.
  
• Continue backwashing until the waste water runs clear
  
• Rinse the filter for 2 minutes
  
• Continue with normal filtration and chlorination

HTH® Xtreme Flocc

 
HTH® Xtreme Flocc clears severely cloudy water in 24 hours. It works by coating and binding all the particles of dirt and debris in your pool water and sinking it to the bottom thus allowing you to manually vacuum the dirt out of the system.

Directions for use:

• Ensure that the pump, filter and pool cleaner are in good working order and that the multiport valve is not leaking
• Top up your pool level
• Check and correct your pH level
• With the pump on circulate/re-circulate/bypass pour HTH® Xtreme Flocc and HTH® Metal Remover around the sides of the pool
• Allow to circulate for 12 hours Switch the pump off for 24 hours to allow the sediment to settle to the bottom of the pool
• With the filter on the waste position, restart the pump and manually vacuum the pool slowly until all the visible sediment is removed from the floor of the pool
• Once the pool is clear, backwash and rinse the filter thoroughly
• Resume normal filtration and chlorination

Back